12
DV51 DV51CH
CAUTION
The minimum clearance
between the bottom
edge of the cooker
hood and an electric
stove is 426 mm .
INST
ALLA
TION
INSTALLATION OF THE COOKER
HOOD
The cooker hood is installed on the bottom of Adroit DV51CH .
1 . Remove the plug from the feedthrough seal of the
condensing water tube of the cooker hood (Figure 1) .
2 .
Lift the cooker hood and fit the hooks at the rear of the
cooker hood into the holes at the bottom of the ventilation
unit . Push in place (Figure 2) .
3 . Ensure that the feedthrough seal of the condensing water
tube sits firmly around the tube.
4 .
Lift the front of the cooker hood to fit the mountings into the
penetrations in the bottom of the ventilation unit (Figure 3) .
5 . Fasten the M5 hexagon screws (2) through the mountings
(Figure 4) .
Lead the power cord and the control cable up along the
cable channel (Figure 3) . Wind approx . half a metre of the
cables behind the cooker hood so that it can be removed for
maintenance purposes where required . Move the metal cover
backwards so that it covers the opening between the cooker hood
and the wall (Figure 5) .
1
2
3
4
5
