Airflow Adroit DV51, Instruction Manual

5

© Airflow - We reserve the right to make changes without prior notice

DV51  DV51CH

INTRODUCTION

IMPORTANT

Apartment-specific 

ventilation units allows 

residents to adjust the 

ventilation efficiency. 

Ventilation is controlled 

based on the need e .g . 

through the cooker 

hood, ventilation control 

panel, or a separate 

control centre . In order 

to ensure that the 

indoor air presents no 

harm to health and 

remains optimal also 

for the structures of the 

building, 

ventilation 

must be kept on 

without disruptions. 

It is recommended that 

ventilation be left turned 

on during long holidays 

also . This keeps the 

indoor air fresh and 

prevents humidity 

from condensing in 

the ventilation ducts 

and structures . It also 

reduces the risk of 

moisture damage . 

VENTILATION UNIT CONTROL 

Ventilation unit control options.

Ventilation has to be constant for the indoor air to stay healthy 

for the dwellers and the structures of the dwelling . Even for 

longer holidays, it is not advisable to stop the ventilation, 

because the indoor air will become stuffy and, during the 

heating season, the indoor air humidity may condense in the 

ventilation ductwork and structures, causing moisture damage .

 
You can control and automate the ventilation unit operation in 

the following ways: 
- By using an Adroit control panel installed in the building 
-  Through the Adroit Home local network connection and the 

Web interface 

- Through the Adroit Cloud Service and the Web interface 
-  Through a remote monitoring service or building automation 

by using voltage signals or Modbus messages 

-  By using the front panel of the cooker hood; this control option 

applies only to the DV51CH . 

At home

Use this mode when the dwelling is occupied .

Away

Use this ventilation mode when the apartment is 

unoccupied, e .g . during a trip or other long absence .

Boost

Fireplace mode

Use this mode when starting a fire in the fireplace. 

The mode is primarily used to create a short period 

of overpressure in the dwelling, stopping spillage of 

smoke back into the property .

Use this mode to increase the ventilation rate, 

e .g . when there are more people than usual in 

the dwelling and for rapid  clearance of air-born 

contaminants .

Changing the ventilation mode

Adroit DV51

The Adroit DV51 ventilation unit is controlled by using the Adroit 

Control panel . Press the left button of the control panel (See 

icons below) repeatedly until the desired status is shown as the 

middle option on the display .

Adroit Control panel