background image

Warranty 

 
 

This product has a warranty period of two years. The warranty can be upgraded to THREE years 
from the date of purchase against faulty material or workmanship by registering on our web site 
www.airflow.com       
 
The warranty only covers the product and not the installation cost. 
 
In case such a fault in the manufacture becomes apparent during the Warranty Period, Airflow 
may, at its absolute discretion, repair the product free of charge or refund the cost of the product 
AS LONG AS AND ONLY IF: 
 
 

1.  The product is returned within the Guarantee Period with evidence of purchase date 

 

2.  The product has not been misused or handled carelessly or used on an inappropriate 

 

     voltage supply 

 

3.  Repairs have not been attempted other than by Airflow’s service staff or 

4.  In Airflow’s sole discretion, the product is found to be faulty. If it were not found to be 

 faulty, the product would be available for collection from the relevant Airflow premises 
 within one calendar month and if it was not collected, it would be subsequently 
 delivered by Airflow and a delivery charge will be made.  

 

5.  Has been installed in accordance with the latest Building Regulations and IEE Wiring 

 

     Regulations. 

 
 
This warranty does not confer any rights other than those expressly set out above and does not 
cover any claims for consequential loss, damage or any costs incurred in the replacement of the 
faulty product. 
 
This warranty is offered as an extra benefit and does not affect your statutory right as a 
consumer. 
 
All information believed correct at time of going to press. 
 
All goods are sold according to Airflow Developments Limited’s Standard Condition of Sale which 
is available on request. 
 
In the interest of continuous development Airflow Developments Limited continuously strive to 
improve their products and reserve the right to change specifications and prices without prior 
notice. 
 
 
 
 
 
 
 

 

 
©Copyright 2011. Airflow Developments Ltd 
 
 

21

 

Airflow Developments Limited 
Aidelle House, Lancaster Road 
Cressex Business Park, High Wycombe 
Buckinghamshire. HP12 3QP. UK 

E-mail: info@airflow.com 
Telephone: +44(0)1494 525252 
Facsimile: +44(0)1494 461073 

Summary of Contents for Duplexvent DV72






















Reviews: