background image

LIMITED WARRANTY

27

AMG Medical Inc • 

www.amgmedical.com

Warranty period.

 Three year warranty on the side frame 

and "X" brace of the wheelchairs.  Six month warranty is 
offered on all other metal parts. Upholstery, plastic, and 
rubber parts are warranted for three months. The warranty 
period for the consumer begins on the date of purchase 
from the dealer. If the product is not sold to the consumer, 
but is rented, etc., the warranty period commences on the 
invoice date.

Limitations:

 This warranty covers only defects in material 

and workmanship.  Products subjected to improper 
maintenance, improper transport, negligence, abuse or 
misuse are not covered by this warranty.  If the serial 
number is removed or defaced, the wheelchair will not be 
covered by this warranty.  If the wheelchair has been 
structurally altered or equipped with parts not distributed 
by AMG Medical Inc., the wheelchair will not be covered 
by this warranty.  

This warranty applies only to the original purchaser.  If you 
want to claim warranty service, contact the store where you 
purchased the chair, who will notify AMG, to determine the 
proper course of action to take, or call 1-800-363-2381.  All 
products shipped to AMG for warranty service must have 
prior authorization from AMG Medical Inc..

Please ensure you provide us with the following 
information when you call:
Date of Purchase:____________

 

Serial Number 

(located on crossbrace)

 :________________  

Once you have a return authorization number, the unit 
should be shipped prepaid to:
AMG Medical Inc., 8505 Dalton, Montreal, QC H4T 1V5

Include a copy of the original bill of sale and a money order 
of $10.00 to cover cost of insurance and return 
transportation.

AIRGO™ OWNER’S MANUAL

Summary of Contents for 700-3 series





























Reviews: