43
SYSTEM SETUP
DownMix:
In LT/RT or stereo output mode, the center speaker
and rear speaker on this page cannot setup, only
can if in 5.1 channel output mode.
SPDIF output:
(SPDIF/RAW): when the unit and the amplifier are
connected by coaxial and optical cables, please
select this item; when it playbacks disc of Dolby
digital and MPEG, the coaxial or optical output will
output the corresponding digital signal, in this case,
the connected amplifier should have the function
of decoding Dolby digital and MPEG.
(SPDIF/PCM): when the unit is connected with 2
channel digital stereo amplifier, please select this
item; when it playbacks disc of Dolby digital, MPEG,
the coaxial or optical output will output in 2 channel
mode modulated by PCM.
Dynamic:
If watching large dynamic scope movie program
at night, select this mode to reduce the volume,
meantime keep the little minutia EQ high level,
thus it can avoid troubling neighbors without
detracting volume quality.
HDCD
Audio Setup Page:
Downmix Stereo LT/RT
Stereo
5.1Ch
Dynamic
- -
- -
- -
- -
FULL
OFF
3/4
1/2
1/4
- -
Spdif Output RAW RAW
PCM
HDCD 1
•
OFF
2•
1
•
Front speaker LRG Large
Small
Center speaker SML Large
Small
Rear speaker SML Large
Small
Off
Subwoofer ON On
Off
Sharpness:
Setup this item to control the sharpness of
image, available range as high – medium – low.
Brightness:
Setup this item to control the brightness of
image, available range from –20 to +20.
Contrast:
Setup this item to control the contrast of
image, available range from –16 to +16.
Video Setup Page
Sharpness Low High
Medium
Low
Brightness 00 Brightness
Contrast 00 Contrast
0
0
