Maintenance
14
3A1182G
18.
Reinstall Fluid Pump
, page 12.
Gear and Pump Assembly
Servicing Gear box Assembly
1. Remove fluid pump. See
Fluid Pump Disconnect
,
page 11.
2. Remove frame from the gearbox by loosening the
four mounting screws.
3. Separate cover assembly (14) from box by remov-
ing bolts (1) from front of cover and back of box and
shoulder bolts (2) from front of cover and back of
box.
4. Lay unit on its back and disassemble gearbox.
5. Inspect bearings (15, 18), Crosshead Assembly
(16), Gearcrank (17) and sleeve bearing (10) inside
cover assembly (14) for wear/damage. Replace
worn/damaged parts.
6. If gear grease needs replacing, replace with gear
grease (Part No. 114819).
7. Clean mating surfaces of cover and box thoroughly.
use Part No. 342899 Instant Gasket.
8. Reassemble in reverse order.
1
2
3
1
4
22
222
159
160
157
158
9
8
7
6
5
23
23
23
23
14
15
13
11
12
10
16
16
16
17
18
18
18
22
22
19
24
25
20
21
26
Lo-Boy
Setup**
Hi-Boy
Setup+
ti16056b
+
+
+
+
**
**
**
**
1
2
18
4
17
16
15
14
6
5
7
8
13
10
11
12
2
1
ti16058b