3. Select
Search for the best driver for your device. (Recommended)
. Click on
Next
to continue.
4. Insert the provided Driver CD. Check
Specify a location
Click on
Browse
.
5. Locate the folder
D:/USB 2.0/GL811EDriver/GL_ReaderDriver_159_98
where
D:
is the letter of your CD-ROM drive and click on
OK
to continue.
6. Click on
Next
.
7. The computer will install the required files automatically and finish the installation.
If you want to remove the driver from Windows 98SE, follow the steps below:
1. Double click on
Add/Remove Program
in
Control Panel
. Select
Generic USB Storage Adapter
and click on
Remove
.
2. Click on
OK
to continue the un-installation.
3. Click on
Yes
to confirm the un-installation.
4. Click on
Yes
to restart the computer to complete the un-installation procedure.
Note:
If you are installing a new hard drive and it does not appear in
My Computer
,
please make sure it is partitioned properly. For partition under Windows, please refer to
"Partition under Windows"
.
For Mac OS:
1. Power on the computer. Make sure the USB 2.0 port is enabled and working
properly.
2. Connect the enclosure with the supplied USB 2.0 cable to any available USB 2.0
port. The system will detect and install the device automatically.
Note:
For users of Mac OS 8.6, the software for Mass Storage Support 1.3.5 is required
to finish the installation. Please download The
USB Mass Storage Support 1.3.5
from
Apple Software Updates at
http://www.apple.com/support
.
Partition under Windows
Windows 98/ME
1. With the enclosure connected, click on
Start
. Choose
Control Panel
under
Settings
and double-click on
System.
Change the tab to
Device Manager
and
open
Hard drives
.
2. Locate the newly installed hard drive model number and right click on it. Choose
Properties
and change the tab to
Settings
. Check the
Removable
box.
3. After restarting the system, a removable HDD will appear in
My Computer
.
Right-click on it and select
Format
to start the format process.