- 39 -
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP
addresses to access the camera.
Start/End IP Address
Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP
address and End IP address. And then, click
Add
to save the range setting. You can repeat the
action to assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address,
the users whose IP address located within 192.168.0.50 ~ 192.168.0.80 will not be allowed to access
the camera.
Deny IP List
The list displays the range setting(s) of IP addresses that are not allowed to access the camera. To
clear the setting, select a range of IP addresses from the list and click
Delete
.
