8
Step 4
Make sure the LEDs of
POWER
,
WLAN
and the
LAN
that is connected to the
Router are lit. If not, try the above steps again.
Step 5
Enter the AP’s password to log in to the AP. The default password is “admin”. It is
recommended to change the AP’s password to protect your network security. Please enter a
new password into “New Password” and “Confirm New Password”. If you do not wish to change
the current password, please leave them blank. Click
Log In
.
Step 6
Assign a valid IP Address/Subnet Mask and Default Gateway for your AP. This setting
must match with your wireless network. You will use this IP address to access the AP’s Web-
based Configuration Utility for more advanced features.
