September 2006
3
Redwing CDMA for Alltel - Quick Start, version 2.40
To configure or provision your modem to work on the Alltel network, you will need device activa-
tion information provided by Alltel. Fill in the requested information and Click Next.
Once you have entered all the requested settings, the modem will check your signal strength, RSSI.
Click Next to begin “provisioning” and setting the configuration into memory. The process may
take a few minutes. Progress information will display across the bottom.
4.
Activate the Redwing
•
Carrier Mobile Directory Number (
MDN
) and Carrier Mobile Identification Number or
Mobile Subscriber ID (
MIN/MSID
), the numbers assigned to your account.
•
System ID (
SID
) for the carrier’s region. This is provided by Alltel.
5.
Setup Private Networking
