September 2006
4
Redwing CDMA for Alltel - Quick Start, version 2.40
Green checks in the boxes indicate the tests were successful and your Redwing is functioning prop-
erly. At this point your modem is configured and activated to work on the Alltel network.
Note:
If you do not have a private network account and you did not select
Setup
Private Networking
from the task menu, this section of the Setup Wizard will not
be displayed, skip to the next section of the Quick Start Guide.
•
The Primary Home Agent (
Primary HA
) and Secondary Home Agent (
Secondary HA
) are
the network servers responsible for IP addressing and routing.
These values may be filled in
for you with defaults for Alltel.
•
HA SPI and AAA SPI
, required for authentication on the Primary and Secondary Home
Agents, is provided by Alltel.
This may be filled in for you with the default for Alltel.
If you access this option after activating the modem, the Setup Wizard will Test the
Redwing’s connection to Alltel to ensure the private networking configuration is
correct.
6.
Test Modem Setup
Your Redwing’s connection to the Alltel cellular network is tested.
Note:
These tests, depending on the
strength of your signal, may take a few
minutes. Initially, while the tests are being
performed, there may be red
X
s in the
boxes.
