Click
Wireless LAN(2.4G)
to configure the wireless settings of the AP.
6
Wireless LAN (2.4G) Configuration
7
Technical Support
Email: support@airlinkplus.com
Website: www.airlinkplus.com
Congratulations! You’ve successfully configured your AP
.
You should custom ize the
SSID
and
Channel
settings as needed. For added
security, you should enable WEP encryption and firewall following instructions
from the manual included in the CD.
The following describes the basic wireless configurations:
Access Point Name:
The name used for identifying the Access Point.
SSID:
Service Set ID. It uniquely identifies a logical network domain
name of your WLAN.
Network Type:
An “
Open
” AP will periodically broadcast its SSID to
allow the wireless clients to recognize their presence. However, this
creates a security hole since any wireless station with SSID set to “any”
or got the broadcast may associate to your AP. It is recommended to
set this option to
Closed
to have your AP only accept stations whose
SSID are the same as this AP.
Country:
Select the country where you use this AP. When the country
setting is changed, the AP scans only the legal frequency channels
allowed in that regulatory domain.
Channel ID:
The radio frequency used for communication. Available
channels vary according to the regulations in the country you specified
in the
Country
drop-down list. Select a channel out of the available
cannels or use the default channel.
