background image

Appendix G 

 

 

 
 
 

AirLive POE-100HD/ 
POE-100HD-ICR User’s Manual

 

72

Appendix G: DDNS Application 

 

1. Preface 

If you have a Cable modem or xDSL, this is a great way to host your own Networked 

Device

 

or other TCP/IP Service. Get your own domain like www.yourname.com, 

www.yourname.com.tw etc. (Note: This domain must be registered with Internic via 

registration authorities such as Network Solutions, DirectNIC, Register.com etc). Your 

domain name's dynamic IP address is automatically tracked by a DDNS server. 

Host your own Networked Device

 

and much more no matter what your computer's IP 

address may be and even if you have dialup, DSL or cable modem internet connection 

where your computer's IP address changes all the time!! DDNS service supports all top 

level domain names including but not limited to .com, .net, .org, .to, .uk etc. 

 

2. Ethernet Network Environment 

Normally, DDNS service is only necessary for the users that could only obtain dynamic IP 

addresses. As to the users that could obtain the static valid IP address, they do not usually 

have to apply the DDNS service. Before we decide if DDNS is necessary for the users, we 

have to check what kind of Ethernet network environment we have to install our Networked 

Device on. 

 

(1) Environment of Fixed Valid IP Network 

 

If users could obtain valid IP addresses, they could save the effort to apply DDNS service.   

Because the IP address in this environment is fixed, users could input the IP address or 

domain name of demo site directly in the IE browser. 

 

(2) Environment of Dynamic IP Network 

 

If users is under an environment of dynamic IP network (Dial-up xDSL), they have to apply 

a domain name in advance. Then apply DDNS service. Finally setup the necessary 

information of DDNS and PPPoE of the Networked Device in order to let the outside 

administrator be able to access through internet. 

 

3. Application Steps—DDNS & Domain Name 

(1). Visit the following web site: 

http://www.dyndns.org/

   

(2). Click “

Account

” 

 

Summary of Contents for AirLive PoE-100HD-ICR


























































































Reviews: