2. Install the AIRMAX2
AirLive AIRMAX2 User’s Manual
18
2.6 LED Table
This section describes the LED behavior of AirMax2.
You can find the LED on the left side of the AirMax2.
Power
Steady Red – Normal Operation
OFF – No Power
Link
Steady Yellow: Link is active
Flashing Yellow: Transmit or receive data
OFF: No connection
WLAN Signal Strength LEDs
Weak :Low signal strength
Strong :Better signal strength
Weak + Strong: Full Signal strength
No connection/Bad signal strength
2.7 Restore Settings to Default
If you have forgotten your AirMax2’s IP address or password, you can restore your AirMax2
to the default settings by pressing on the “reset button” for more than 5 seconds. The
reset button is inside the bottom case. Please see diagram below for details.