4. Wireless Settings
AirLive AIRMAX2 User’s Manual
40
Disable:
When selected, no MAC address filtering will be performed.
Allow list:
When selected, data traffic from only the specified devices in the
table will be allowed in the network.
Deny list:
When selected, data traffic from the devices specified in the table
will be denied/discarded by the network.
4.3 LED Threshold
Wireless Settings -> LED Threshold
This function is available only for Client, Bridge, and WISP Router mode.
The AirMax2 is equipped with 2 LEDs on the Left side of the housing to indicate the signal
strength of current connection. It is very useful in helping you to align the antenna. The
signal level are classified into 4 levels, you can change the Thresholds (dividing line)
between levels in this setting. The unit for Signal Strength is in Percentage from 0 to 100.
The higher.the value, the stronger the signal.
No Signal
: When signal strength is less than “Weak Signal Threshold”(for
example, 20%) . Both LED are off.
Weak Signa
l: When signal strength is greater or equal than the “Weak Signal
Threshold”(for example 35%). Only the Blue LED is on.
Strong Signal
: When signal strength is greater or equal than the “Strong Signal
Threshold”(for example 60%). Only the Green LED is on.
Full Signal
: When signal strength is greater or equal than the “Full Signal
Threshold”(for example 75%). Both Green and Blue LEDs are on