8. Bandwidth Control
67
AirLive AIRMAX2 User’s Manual
8.4.1 Interface Control Settings
In the Interface Control Settings, the AP only controls the total bandwidth limit of an
interface. For example, if you want to limit the output data rate of the LAN to 512K and the
output data rate of WLAN to 1024K. You should perform the following steps:
1. Enable the “Interface Bandwidth Control
2. Enter “512” in the “LAN Output Rate”
3. Enter “1024” in the “WLAN Output Rate”
4. Click on “Save”
5. Reboot
the
AP.
8.4.2 Define Policy
A policy is a set of bandwidth rules that can be used as a template. For example, if you
want to provide 2 kinds of bandwidth speed to the users: