3. Configuring the IP-1000R v2
7
AirLive IP-1000R v2 User’s Manual
3.2.1 Windows 95/98/ME
1. Select
Control Panel - Network
. You should see a screen like the following:
2. Select the
TCP/IP
protocol for your network card.
3. Click on the
Properties
button. You should then see a screen like the following.
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the
default Windows setting, and it is recommended to use it. By default, the IP-1000R v2 will
act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-1000R v2.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the
following changes:
