Chapter 3. Base Installation
AirLive MW-2000S User’s Manual
6
Chapter 3. Base Installation
3.1 Hardware
Installation
3.1.1 System Requirements
y
Standard 10/100BaseT including five network cables with RJ-45 connectors
y
All PCs need to install the TCP/IP network protocol
3.1.2 Package Contents
The standard package of MW-2000S includes:
y
MW-2000S x 1
y
CD-ROM x 1
y
Quick Installation Guide x 1
y
Power Adaptor (DC 5V) x 1
y
Cross-over Ethernet Cable x 1
y
Straight-through Ethernet Cable x 1
y
Console Cable x 1
Warning:
Using a power supply with different voltage rating will damage this product.
3.1.3 Panel Function Descriptions
Front Panel
LED:
There are four kinds of LED, Power, Status, WAN and LAN, to indicate different status of the system.
y
Status:
o
For Normal Startup:
¾
Flashing:
during system startup.
¾
Steady ON:
to indicate the system is in “Normal Operation” modes.
o
In Reset Operation:
¾
Flashing:
Status LED is flashing if the Reset button is pressed for more than 3 sec and released in
less than 10 sec. When the Status LED starts flashing is the indication that the system has been
successfully reset.
¾
Steady ON:
status LED will switch from flashing to steadily ON if the Reset button is pressed over
10 sec, it indicates that the system has been reset to factory default setting.
y
WAN1~2/Private/LAN1~4
o
Light blinking:
data packets are being transmitted or received.
o
Light on:
linked/established Ethernet connection present.
o
Light off:
no existing Ethernet port connections to MW-2000S.
Wireless Mangement Gateway
MW-
S
2000
Status
Private
WAN1
WAN2
LAN1
LAN2
LAN3
LAN4
Power
Power
Status
WAN1-2 / Private / LAN1-4
Summary of Contents for MW-2000S
Page 1: ...MW 2000Sv2 Hotspot Management Gateway User s Manual ...
Page 23: ...Chapter 4 Basic Hotspot Configuration AirLive MW 2000S User s Manual 18 Setup Flow ...
Page 33: ...Chapter 5 Multi Service Providers AirLive MW 2000S User s Manual 28 Setup Flow ...
Page 58: ...Chapter 6 Multi Service Zones AirLive MW 2000S User s Manual 53 Setup Flow ...
