Appendix A: Network Configuration on PC
AirLive MW-2000S User’s Manual
171
3)
Using DHCP:
If you want to use DHCP, please
choose
“Obtain an IP address automatically”
on the
“IP Address”
label and click
OK
. This is
also the default setting of Windows. Then, reboot
the PC to make sure an IP address is obtained
from MW-2000S.
4)
Using Specific IP Address:
If you want to use
specific IP address, you have to ask the network
administrator for the information of MW-2000S:
IP
address
,
Subnet Mask
,
New gateway
and
DNS
server address
.
Note:
If your PC has been set up completed, please inform the network administrator before proceeding to the
following steps.
y
Please
choose
“Specify an IP address”
and enter the information given by the
network administrator in
“IP Address”
and
“Subnet Mask”
on the
“IP Address”
label
and then click
OK
.
Summary of Contents for MW-2000S
Page 1: ...MW 2000Sv2 Hotspot Management Gateway User s Manual ...
Page 23: ...Chapter 4 Basic Hotspot Configuration AirLive MW 2000S User s Manual 18 Setup Flow ...
Page 33: ...Chapter 5 Multi Service Providers AirLive MW 2000S User s Manual 28 Setup Flow ...
Page 58: ...Chapter 6 Multi Service Zones AirLive MW 2000S User s Manual 53 Setup Flow ...
