9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this print server.
The format of “set” command is as following:
set argument_name value
Then the value will be written into the system configuration. For example,
if you want to set IP address of the print server to 192.168.2.2, type “set ip
‘192.168.2.2’” command and the IP of the print server will be changed:
admin# set ip 192.168.2.2
If you enter only “set”, the system will list all arguments of “set”
command and the command format.
The following table lists all the arguments whose value can be modified by
“set” command:
Argument Description
Example
psname
Print server name
set psname PS001
password
Login password
set password 1234
username
Login username
set username admin
ip
IP of the print server
set ip 192.168.2.2
gateway
Default gateway of the
print server
set gateway 192.168.2.
254
submask
Subnet mask of the print
server
set submask 255.255.
255.0
polling
Polling interval (in
second) of the print
server for waiting
printing jobs on the
NetWare server
Set polling 3
aq1
Name of the printer queue
on the NetWare server
set aq1 PQ1
applezone
The name of AppleTalk
zone that this print
server joins to
set applezone Apple
Argument Description
Example
printertype1
The type of the printer
attached to this print
server
set printertype1 LaserW
Riter
SMBDG
The name of the SMB group
name that this print
server joins to
set SMBDG default
86
Summary of Contents for P-201
