4. Administrating the Device
47
AirLive PoE-2600HD/
WN-2600HD User’s Manual
z
UPnP:
To enable or disable the UPnP service here.
z
Friendly Name:
Shows the friendly name of this device here.
z
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT router on
your network, using UPnP™. Note that UPnP™ must be enabled in the NAT router
first.
z
Port Range:
The port range will open in NAT router.
z
External IP address:
Show the IP address and port for WAN access through Internet. If NAT traversal is
configured successfully, user can use this IP address and port to access this device.
The external IP address is not shown in case NAT traversal function is failed.
4.1.7 Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of
computers, devices, and services on IP networks. Bonjour uses industry standard IP
protocols to allow devices to automatically discover each other without the need to enter IP
addresses or configure DNS servers. Specifically, Bonjour enables automatic IP address
assignment without a DHCP server, name to address translation without a DNS server,
and service discovery without a directory server. Bonjour is an open protocol which Apple
has submitted to the IETF as part of the ongoing standards-creation process.
z
Bonjour:
To enable or disable the Bonjour service here.
z
Friendly Name:
Shows the friendly name of this device here.
