AirLive PoE-FSH2442 User’s Manual
10
Chapter 6: CONFIGURATION
Through the Web Browser you can configure the Switch such as VLAN, Port Trunking, and Broadcast
Storm … etc.
With the attached Web Management Utility, you can easily discover all the Web Management Switch, assign
the IP Address, changing the password and upgrading the new firmware.
6.1
Installing the Web Management Utility
The following gives instructions guiding you through the installations of the Web Management utility.
1. Insert the CD shipped along with POE-FSH2442G into your CD-Rom Drive. The Autorun.exe program
should be executed automatically. If not, please run Autorun.exe manually from CD-ROM drive’s root
directory.
2. The following screen will be displayed. Click “Install Driver And Utility”.
3. Follow the on-screen instructions to install the utility.
4. Upon completion, go to
Program Files -> Web Management Utility
and execute the Web Management
utility. (Figure 7.)
Figure 7. Web Management Utility
The Web Management Utility was divided into four parts,
Discovery List, Monitor List, Device Setting
and
Toolbar function
, for details instruction, follow the below section.
6.2 Discovery
List
This is the list where you can discover all the Web management devices in the entire network.
By pressing the
“Discovery”
button, you can list all the Web Management devices in the discovery list.
Double click or press the
“Add to monitor list”
button to select a device from the Discovery List to the
Monitor List.
