AirLive SNMP-FSH2602MG User’s Manual
18
Step 2
: Enter the switch’s IP address in the Address field and press enter.
Step 3
: When prompt for User’s name and Password, enter the following information:
User’s
Name:
admin
Password:
123
You should see the following welcome screen after the process is completed:
Figure 4-2 Main Web Management Screen
Menu Bar
On the left side of the screen is the Menu bar where you and click to configure
management functions. Most configuration functions are under the “Administrator” menu.
We will explain the menu items in the remaining section of this chapter.
Top Switch Image.
The switch’s image on the upper portion of the screen gives the quick overview of the port
connection status. When a port is plugged in, the switch’s image will show a “plug” on the
corresponding port.
Click on a port will show the quick port status
. Please note that
the switch’s image shows a 2-port 1000Base-TX module even when there is no module
installed. However, clicking on the module port state will show whether the port is installed.
If only 1-port module is installed, Port-25 will show the status of the single module port.
