AirLive WMU-6000FS User’s Manual
42
Please refer to FAQ in Chapter 7 to get more detailed information.
Advance Setting:
Wireless
mode:
11b/g mixed
can let 11g or 11b computers both exist
on the network, b
z
ut the speed will be reduced. Select
11g only
for
maximum speed, but no 11b users will be allowed on the network.
z
Beacon interval: This represents the amount of time between beacon
transmissions. The interval tells receiving devices on the network
how long they can wait in low-power mode before waking up to
handle the beacon. Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a Beacon interval value
between 1 and 1000. The default value is set to 100 milliseconds.
z
RTS Threshold: The RTS threshold specifies the packet size of an
an access
e is
from
1 to 2347,
and default value is set to
2347
.
RTS transmission. This helps control traffic flow through
point, especially one with many clients. The setting value rang
Summary of Contents for WMU-6000FS
