6
6
Maintenance
To reduce the risk of electrical shock and fire please observe the following instructions. Cleaning the
Heater regularly will help to maintain its efficiency.
- Always unplug the cord before moving, servicing or cleaning.
- NEVER place the Heater in or near water. DO NOT IMMERSE HEATER IN WATER.
- Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove
the lint and dirt from the surface of the Heater.
- Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
- Use a toothbrush or other soft bristle brush to gently loosen any dirt not removed by the vacuum.
- NEVER attempt to take apart the Heater.
- Clean the body of the Heater with a soft cloth only.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner,
or other harsh cleaners.
SERVICING:
For servicing, other than general user maintenance, please contact Customer Service
at 800-233-0268, Monday through Friday, from 8am-5pm Eastern.
STORAGE:
Store the Heater with these instructions in the original carton in a cool, dry place.
WARNING
Safety Features
A Tip-Over Switch is built in to prevent operation if the Heater is tipped over.
A thermal overload protector is built in to prevent overheating.
If an overheat temperature is reached, the Heater will automatically shut off.
It can only resume operation when the user resets the unit.
RESET INSTRUCTIONS:
Unplug the Heater and wait 10 minutes for the Heater to cool down. After the
Heater has cooled down, plug the unit into a 120V~ electrical outlet and follow
the EZTouch™ Controls instructions described in this manual.
Trouble Shooting
If your heater shuts off unexpectedly or fails to operate, the previously
mentioned safety feature may have been activated to prevent overheating
(See Reset Instructions). Be sure the power cord is plugged into a working
electrical outlet. Check your Temperature setting. The Heater may be off
because it has reached the desired temperature setting. If your Heater
runs for several minutes and shuts off repeatedly, your Heater may require
cleaning. See Maintenance section below, or the EZclick™ Filter System
instructions described in this manual.
If you have a problem that can not be resolved by the steps listed above,
contact Technical Assistance at 1-800-233-0268, Monday through Friday,
between the hours of 8 a.m. and 5 p.m. EST.
11
Sistema de Filtro EZclick
™
11
Pulse el botón del Filtro EZclick™ para liberar
la cubierta del filtro permanente. Limpie el
filtro con una aspiradora con cepillo, cada
dos semanas; de esa manera, ayudará a
mantener el desempeño óptimo del filtro.
Recuerde limpiar el filtro antes de guardar la
unidad al final de la temporada.
Control Remoto
Todas las funciones realizadas con el control
remoto operan de manera idéntica a los
controles de EZtouch™. Quite el tornillo de la
cubierta de la batería antes de instalar las
dos baterías "AAA" (incluidas). No mezcle las
baterías viejas con las nuevas. No mezcle
baterías alcalinas, estándar (carbón-zinc),
recargables (níquel-cadmio) o baterías de
iones de litio. Coloque el tornillo en la
cubierta de la batería.
Función de
Graduación Automática
Los controles iluminados pasarán al Modo de
Graduación Automática 10 segundos desde el
momento en pulsar el último botón. La reducción
en el nivel de brillo mantendrá la habitación más
oscura durante el uso del calentador. Una vez que
se tocan los controles, la pantalla volverá al brillo
original. La Función de Graduación Automática
reduce el brillo de la pantalla en un 40%.
