28
temporarily
flash in the display for 5 seconds.
Then the display shows the current inner
temperature again.
USE AND CONTROL
– DUAL ZONE
The Controls of Your Unit
POWER
To turn the appliance on/off, press and hold the
key for 5 seconds.
NOTE:
Pressing the
key once can switch off the
audible alarm when the alarm is on.
UP
To increase (warm) the set temperature by 1°C or
1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or
1ºF.
LIGHT
Used to turn the inner light on/off.
Display
Display the digital temperature and service
indicators.
is for UPPER temperature zone and is for
LOWER temperature zone.
Indicator Light
The indicator light is located at the right lower corner
of the display. The indicator light will be on when the
multi-key function is selected. To perform the multi-
key function, press and hold the first key, then press
the rest key for at least 5 seconds and then release
all the keys.
ºF/ºC
Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the
LIGHT
key for 5 seconds.
Key Lock (Optional)
If in 2 minutes or longer without touching any key,
the key lock will be activated automatically. To
remove the lock, press the
UP
and
DOWN
keys at
the same time for at least 5 seconds and the
indicator light will flash three times to confirm the
action.
Setting the Temperature Control
•
The unit has two separate temperature zones.
The temperature of both zones can be set
between 5ºC and 20ºC (41ºF and 68ºF). The
LOWER temperature zone is ideal for storing
white and red wine at a setting of 13°C to 20°C
(55°F to 68°F). The UPPER temperature zone
is suitable for storing champagne and white
wine at a setting of 5°C to 13°C (41°F to 55°F).
•
When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The preset temperature at the factory
for UPPER temperature zone is 8ºC (46ºF) and
for LOWER temperature zone is 12ºC (54ºF).
•
You can press the left side
UP
and
DOWN
keys
to control the internal temperature of the
UPPER temperature zone and press the right
side
UP
and
DOWN
keys to control the internal
temperature of the LOWER temperature zone.
When you press the two keys at the first time,
the display will show the last temperature set
previously.
NOTE:
The
temperature
set
for
the
LOWER/RIGHT temperature zone must always
be just as high or higher than that in the
UPPER/LEFT temperature zone. For optimal
performance, the set temperature of the two
zones should differ by at least 4°C.
•
The temperature that you desire to set will
increase 1ºC or 1ºF if you press the
UP
mark
once, on the contrary the temperature will
decrease 1ºC or 1ºF if you press the
DOWN
mark once. The display flashes while you make
the setting.
•
After the temperature has been set, the display
shows the current inner temperature of the
particular temperature zone.
•
To view the set temperature at any time, press
the
UP
or
DOWN
key, the set temperature will
temporarily
flash in the display for 5 seconds.
Then the display shows the current inner
temperature again.
TEMPERATURE DISPLAY
During normal operation, the temperature display on
the control panel shows the temperature inside the
appliance.
The temperature display will flash
if
-
A different temperature is being set,
-
The temperature in the zone deviates by more
than 5°C from the set temperature.
The temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
