The Air Compressor has been specially
designed for simple and fast inflation
of car tires, bicycle tires, basketball,
sporting equipment, and party
balloons. The air compressor provides
a small quantity of air at a relatively
high pressure.
INFLATING A CAR TIRE
AND BICYCLE TIRE
1. With power switch in “O” (off)
position, roll out the 12V cord from
storage compartment, and connect
the 12V car cigarette lighter adapter
to the cigarette lighter socket in
your car.
2. To choose desired pressure format
PSI, BAR, KPA, press the “M” button.
Each press of the “M” button cycles
through the pressure format.
3. Press “+” or “-” for 3 seconds to
check pre-set level. Adjust to desired
level by pressing “+” or “-”. Once
pre-set pressure is set, wait a few
seconds for display to change back
to zero.
4. Screw the thread connector onto
tire’s valve stem. When connected
correctly the gauge will display the
current pressure in the tire.
5. Turn the “I/O” switch to the “I”
position. Your compressor will
now inflate your tire to the pre-set
pressure level, and will shut
off automatically.
6. Remove the thread connector from
the tire.
7. Disconnect the 12V car cigarette
lighter adapter from the cigarette
lighter socket and store the 12V cord
into the compartment area.
Note:
To avoid over-inflation of tires,
please check the recommended car
tire pressure in the vehicle’s owner’s
manual. For bicycle tire, please check
the tire marking.
INFLATING SPORTING EQUIPMENT
(I.E. BASKETBALL) OR PARTY BALLOONS
1. With power switch in “O” (off)
position, roll out the 12V cord from
storage compartment, and connect
the 12V car cigarette lighter adapter
to the cigarette lighter socket in
your car.
2. Screw the ball/balloon adapter into
the thread connector.
3. Insert the ball/balloon adapter into
valve of the object to be inflated.
INFLATION INSTRUCTION
3
HIGH-PRESSURE AIR COMPRESSOR
[ACT 027] Manual E 6/9/05 10:18 PM Page 6
