Safety
S-6
When cleaning dust accumulated in such devices as the
air-filter, by blowing compressed air, wear safety glasses,
etc. to protect your eyes.
Be sure to stop the engine, and let the coolant water
sufficiently cool down before draining it.
If the drain valve is opened before the coolant water is
cooled enough, hot water could jet out, and it could cause
scalding.
Be sure to perform the
periodic checks
of compressor oil
and oil separator.
Neglecting checks could cause overheat of the oil,
resulting in a fire.
Waste liquid from the machine contains harmful material.
Do not discharge it onto the ground or into the river, lake
or sea. Such material will contaminate the environment.
Be sure to use a container to hold the waste liquid from
the machine.
Be sure to follow the designated regulations when
disposing of oil, fuel, coolant (antifreeze), filter, battery or
other harmful materials.
The engine of this machine and electrical parts many electronic devices have been
installed. If you
perform
welding work, remove the connector of the electronic control
equipment.
Application of excessive current to electronic controls can cause
equipment malfunction.
M003
H990432
W004-1
A100285
Go
to
Discount-Equipment.com
to
order
your
parts
