3. Installation
3
-
2
H000480
H000466
M970092
3.2 Handling the Drawbar
When the drawbar 1 is raised up for transportation, be sure
to secure it by engaging the drawbar hook 3 with the holder
2
without fail.
If the drawbar hook comes off the drawbar falls down,
causing serious injury.
Therefore, make sure that the stopper
4
is locked at the
lock position shown in the figure.
When the drawbar stays at the release position shown in the
figure, the hook 3 could come off the holder 2 , causing
the drawbar
1
to fall down.
Handle the hook 3 holder 2 and stopper 4 so carefully
to prevent your fingers from being caught and injured.
3.2.1 How to secure the drawbar
①
Place the drawbar 1 to the front of the machine so that
the wheel tires can be aligned.
②
With the stopper 4 being at the lock position, raise the
drawbar 1 up to the position at which the hook 3 can
be engaged with the holder 2 (See Fig.1)
If the stopper stays at the holder and so the drawbar
cannot be firmly fixed. (See Fig.2)
③
Make sure that drawbar hook is securely engaged with
the holder.
④
Make sure that the stopper stays at the lock position.
(See Fig.1)
1 2 4
Release position
H000466
M970098
3
Release position
Fig.1
Lock position
Fig.2
1 2 4
1
3
Precautions on handling drawbar
Lock position
Summary of Contents for PDSE900S-4B1
