16
3.10. Jointing against the ceiling
Airmaster recommends jointing the gap between the unit’s
top plate and the ceiling if the unit is mounted in a fully
visible manner. The jointing on the sides and in the front
can be carried out with, for example, joint backing strip or
joint strip with a suitable thickness. Jointing the back edge
is not necessary.
3.11. Fitting of Panels
The panels must only be fitted once the unit, complete
with all equipment, has been fitted and connected, and
the functions of the unit thoroughly tested. Not at the AM
150 and AM 300.
Press the panels to the clips on the unit until they attach
securely to the clips.
3.12.
Installation Check
yes no
Serial numbers noted
Wall frame fitted
Cooling module fitted
Safety tape removed
Unit fitted
Ceiling fittings attached
Ducts and grilles fitted
Roof cap fitted
Screws retightened
Name of installation engineer:
Comment:
