SAFETY INSTRUCTIONS
WARNINGS
Place of installation and serial numbers (S/N):
Type:
Delivery date:
Place of installation:
S/N of Air handling unit:
S/N of Cooling Module:
This Manual must be read before installing the
Airmaster air handling unit. Following this Manual
will ensure this product is operated correctly.
The installation engineer is responsible for
ensuring that the unit is installed according to
current regulations and standards.
When installing the air handling unit in a room
with a fire or stove drawing air from the room, all
applicable provisions must be observed.
The unit should not be installed in rooms with
abrasive particles or flammable or corrosive gas
in the air, in wet rooms or explosion-protected
rooms.
The unit should not be used without the filters
specified in the Operator’s Manual.
The manufacturer cannot be held liable for dam
-
age arising from use or installing in contravention
of these instructions.
The manufacturer reserves the right to make
changes without notice. All values stated are
nominal values and can be affected by local
conditions.
Failure to observe the warnings indicated by a
danger symbol implies a risk of personal injury
or damage to property.
This manual relates to the Airmaster unit it
accompanies plus all equipment, and must be
given to and saved by the unit’s owner.
All necessary data and guides to network integra-
tion can be downloaded from
.
Service covers may not be opened without
first disconnecting the unit’s power supply and
preventing use.
The unit may not be started up until all service
covers and grates on duct connections have
been installed.
