10
3.4. Installation of the Cooling Module
CC 500 or 800
The cooling module has to be adjust into a horizontal
position.
1. Drill, if relevant, any holes for the ceiling brackets
according to the dimension drawings in “Appendix
2 Additional Dimensions” and attach the ceiling
brackets
2. Appropriate lifting equipment is used to lift the
cooling module into place on the wall frame.
We would point out that, when lifting the cooling module
a protective underlay must be placed beneath the service
cover to prevent scratches to the service cover. This
underlay may for example be strong, clean cardboard or
equivalent.
3. Press the cooling module against the wall frame
and use the accompanying bolts to screw it tightly
to the frame and, if relevant, to the ceiling brackets.
