background image

IMPORTANT INFORMATION

Please read these instructions thoroughly before use. Failure to follow instructions 

may result in equipment damage or failure, losses, injury or death.

 

DANGER 

To avoid possible electric shock, burns or serious injury: 

 

•  If the power cord has been damaged, DO NOT operate, compressor should be replaced. 

  •  Close supervision is necessary when the unit is used by or near children.

  •   DO NOT touch the compressor during operation or shortly after use. Compressor 

surfaces become very hot during operation, allow product to cool before handling.

  •  Keep fingers and objects away from openings and rotating parts. 

 WARNING   

To reduce the risk of electric shock:

  •   Connect only to a properly grounded receptacle, which is serviced by a Ground Fault 

Circuit Interrupter and never remove the ground pin from the plug. 

  •   Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the 

receptacle or plug that prevents water from traveling along the cord in the direction of 

the receptacle. 

  •   ALWAYS unplug the compressor from the power source when it is not in use, and before 

installing, removing or servicing the compressor components.

  •  DO NOT immerse the compressor plug in water or attempt to use a wet plug. 

  •   DO NOT use the compressor in areas where it will come into contact with water or  

other liquids. 

 

CAUTION 

 

To reduce the risk of equipment damage or failure:

  •  DO NOT place compressor near flammable or other dangerous materials or objects.

  •   DO NOT pump flammable or explosive gases or use in an atmosphere that contains  

such gases.

  •  DO NOT lubricate the compressor. The compressor is oil-less.

  •  Blocking airflow over the product in any way can cause the product to overheat.

TECHNICAL SPECS

2

IMPORTANT: Airmax®, Inc. is not responsible for equipment damage or failure, 

losses, injury or death resulting from failure to follow safety precautions, misuse  

or abuse of equipment.

MODEL

HP

RUNNING AMPS

VOLTS

POWER CORD

RP25 (87R)

1/4

1.6 or 0.8

115V or 230V

6'

RP50 (87R)

1/2

4.1 or 2.1

115V or 230V

6'

RP75 (72R)

3/4

5.3 or 2.7

115V or 230V

6'

airmaxeco.com  |  866-424-7629  

2

Reviews: