AIROCIDE APS-200, Manual

8

Operating Modes

Normal Operating Mode

When the power switch is in the “on” position, the front grill is installed 

and no error condition is detected, one of the icon lights will indicate 

the “active” mode (low, high or automatic icons as referenced on page 7).  

The “active” mode indicator light will be bright when the “active” mode

is first selected, then will dim after 10 seconds and remain on until

another mode button is pressed again. 

Grill Removed Mode

If the front grill is removed while the power switch is in the “on” 

position, the unit will go into “standby” mode and the “active” mode

indicator light will flash brightly.

Error Mode

If the front grill is installed with the power switch in the “on” position 

and one or both of the Reaction Chambers is missing, non-functional 

or not seated properly, the unit will enter “standby” mode, causing

all of the indicator lights to flash brightly. This condition can be

automatically cleared by correctly installing two functional 

Reaction Chambers.

Change Reaction Chamber Mode

When the Reaction Chambers need to be changed the “active” mode 

indicator light will flash dimly.  Extreme environments may require 

cartridges to be changed every 6 months.  Your Airocide will not be 

effective in terms of removing pathogens in any matter after the light 

has begun flashing and new Reaction Chambers should be installed.  See 

Maintenance and Cleaning section for details.

No Lights

Indicator lights function only when the unit is plugged in and the power 

button is in the “on” position.