TROUBLESHOOTING
The nebulizer system
does not operate.
The system is
turned on but does
not nebulize, or the
medication does not
nebulize properly.
The system
overheats.
The device is noisy.
The battery is not
working optimally.
The battery is not
charging.
14
1. Ensure that the chosen method of powering is
properly connected to the unit and to the
source of power.
2. Press the ON/OFF button again.
1. Ensure that the nebulizer is not empty and that
the micronization cone is properly seated in the
nebulizer chamber. If needed, clean or replace
the nebulizer chamber assembly.
2. Ensure that the nebulizer system is seated
and/or verify air tubing connection (repeat the
connection procedure as described on page 9).
3. Ensure that the nebulizer is in an upright
position during use. Do not tilt beyond 30°.
4. The air filters may be dirty or obstructed. If
needed, replace them as described on page 13.
If the internal temperature reaches the preset
level, the unit will automatically shut down to
prevent the unit from overheating. Allow it to
cool down for a minimum of 40 minutes.
Ensure that the filter cover is properly in place
and that it completely covers the filter seat.
Battery was not properly conditioned (charged for
at least 8 hours before first use). If it has been in
use for approximately four months, the battery
may need to be conditioned again.
Verify all power cord connections and cord
conditions, as well as the power outlet.