ENGLISH
Cod. 2200772300 00 - Edition 04/2003 - 73
25.0
REPLACING THE BELT
BEFORE CARRYING OUT ANY MAINTENANCE THE MACHINE MUST BE STOPPED, CUT OFF THE MACHINE
FROM THE ELECTRICAL MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION CIRCUIT, CHECK THAT
THE MACHINE IS NOT UNDER PRESSURE.
Proceed as follows:
- Open the front panel Ref. 1 Fig. 28 with the special key.
- Remove the fixeds protections device Ref. 2, 3, 4 Fig. 28.
- Slacken the screws by half a turn Ref. 5 Fig. 28
- Release belt tension by unscrewing the screw Ref. 6 Fig. 28
- Unscrew screws Ref. 7 Fig. 28, remove the ferrule Ref. 8
- Dismantle and remove the belt Ref. 9 from the fan opening, and fit the new belt following the instructions in reverse
order.
-
To set belt tension, proceed as given in Chap. 24.0
- Reassemble the virola Ref. 8 Fig. 28
-
Reassemble the permanent protections Ref. 2, 3 Fig. 28 fixing them in place with the special safety screws
- Close the panel Ref. 1 Fig. 28
FIG. 28
2
3
6
5
9
8
7
1
5
Summary of Contents for COMBI DRY BASIC 3
