background image

 

 

2

TABLE OF CONTENTS 

ENGLISH 

1. 

Prefatory notes      

page  25 

2. 

Safety instructions 

page  26 

  

3. Warnings 

page 27 

 

4. Specifications 

page 29 

 

5. 

Parts and features 

page  29 

  

6. 

Installation and assembly 

page  30 

7. Operating 

procedures 

page 32 

8. Maintenance 

page 32 

9. Storage 

page 34 

10.  Troubleshooting guide 

page  34 

 

 

    

 

1. PREFATORY NOTES 

Buying your AIRPRESS compressor installation, you have become the owner of a 
compressor installation with a high performance and reliability level. Correct use 
and regular maintenance will increase the life of the compressor. 
 
In this manual you will find operation and maintenance instructions. Read it 
carefully and keep it as a guide to your compressor. 
 
The compressor has been built to supply compressed air. In particular the 
appliance cannot be used to produce air to be breathed by humans or used on 
direct contact with foodstuffs. The appliance must be used only for the purpose for 
which it was specifically designed. All other uses are to be considered incorrect 
and therefore unreasonable. The manufacturer cannot be held responsible for any 
damage resulting from improper, incorrect or unreasonable use. This machine is 
not suitable for external installation. 
 

Legend (page 1) 

Model changes reserved. 

 

A = front 

C = side 

B = back 

D = bottom 

 

A1 handle  

B3 hose real  

A2 outlet pressure gauge 

B4 utility hook 

A3 regulator 

B5 storage      

A4 quick connect  

C1 oil fill tube 

A5 wheels  

C2 removeable cover 

A6 pressure switch      

C3 pump 

A7 safety valve    

C4 oil sight glass 

A8 tank pressure gauge 

D1 tank 

B1 air intake filter 

D2 condensate drain valve  

B2 cord real         

 

Summary of Contents for LHR 215/5




















Reviews: