AirQ air-Q, Instruction Manual

32

33

1.

  Connect the air-Q with the included USB-C cable and the power supply.

2.

  Both LED strips (green and blue) will indicate the booting process. This lasts 

approximately 15 to 20 seconds. The air-Q is now operational and is already 
measuring and recording data. An air-Q Wi-Fi hotspot can now be found.

Initial Setup via Web Browser

EN

1.

  Connect the air-Q to the included USB-C cable and power supply.

2.

  Both LED strips (green and blue) will indicate  

the booting process. This lasts approximately 15 to 20 seconds.  
The air-Q is now operational and is already measuring and recording data. 
(An air-Q Wi-Fi hotspot can now be found.)

3.

   Download the air-Q app from the Google Play Store (Android) or the  

Apple App Store (iOS) and open it.

4.

 Run through the air-Q app’s setup assistant and configure the Wi-Fi access

Initial Setup via Smartphone

3.

     Connect to this hotspot (Please ignore/accept information about  

a non-existent internet connection): 

SSID:  

air-Q – Device [abcde]

Password:  airqsetup

4.

  Open in browser the website 

http: //air-q.local

 or 

http://192.168.4.1

Set up the Wi-Fi and password there.

5.

  The air-Q can then be used via the smartphone app or via calling  

abcde_air-q.local

 or the assigned IP address in the web browser 

(

abcde

 stands for the first five characters of the serial number as  

an example of the device > see device sticker).

 
Attention! 
PC/ smartphone and the  
air-Q must be in the same  
Wi-Fi to complete the setup.

You can use the QR code on the back  

of this manual/packaging.

abcde

↑   Serial number is located on   ↑ 

the bottom of the device