AirQ air-Q, Instruction Manual

42

43

CE Conformity

Corant GmbH hereby declares that the device is in compliance with the 
basic requirements and other relevant provisions of Directives 2014/53/EU, 
2014/30/EU, 2011/65/EU and ETSI EN 301 489-1.

You can find the extended version of the CE Declaration of Conformity at: 

air-q.com/documents

EN

Safety Instructions

To avoid damage to the device, equipment or connected devices and to 
reduce the risk of injury, malfunction, property damage and other poten-
tial hazards as much as possible, please heed the following safety instruc-
tions: Handle your air-Q carefully. Avoid disassembling, dropping, bending/ 
squeezing the device, exposing it to excessive heat or stepping on it to avoid 
damaging it. Using a damaged device can result in overheating and personal 

injury. The air-Q should not come into contact with liquids to avoid the risk of a 
short circuit or overheating.

Repair and Maintenance: Never try to repair the air-Q yourself without instruc-
tions and consultation. Disassembling the device could result in injury or dam-
age to the device. Unauthorised repairs or changes can permanently damage 
the device and limit your warranty and legally guaranteed services. If your air-Q 
is not working properly or is damaged, do not operate it.

Power supply: Make sure that the air-Q and the supplied power supply are well 
ventilated during use. Using damaged cables or power supplies can result in 
fire, electrical shock, injury, or damage to the device itself or to other property. 
Only use the power supply from the scope of delivery to power your air-Q. 
When you connect the device to the electrical grid, plug the power supply into 
a socket (220 V) that is easily accessible and near the device. 
Do not operate the device in direct sunlight. The air-Q may only be operated 
with the power supply and cable supplied. Failure to do so could result in fire, 
electric shock, personal injury, or damage to the device and equipment.