Page
2
of
7
Fig. 1
1
x
This unit can be set up and packed away by one person, who has had
proper manual handling training and uses the correct equipment to move
the inflatable.
Installing the metal frame:
1.
The first step is to unpack the pieces of the metal frame.
2.
You should start to piece them together from the bottom.
3.
You should place the two legs approximately 2 meters apart on a flat ground. The legs can be seen
in fig.1:
4.
The next step is to place the metal parts, that can be seen in fig.2&3, on both leg parts.
After this is ready, you need to place the metal part that connects the two legs.
The bottom part of the frame is made out of two pieces, as seen in fig.4:
IMPORTANT:
the upper connection part of the metal frame is also made
out of two similar pieces, but they are thinner than the ones at the bottom.
Fig. 3
Fig. 4
Fig. 2
