21
Figure 3.9
PT Control:
Set Pan/Tilt as upward, downward, leftward, rightward, up-left, down-left, up-right, down-right,
etc directions.
Center:
Click this icon, the camera will pan/tilt, then stop at the center. Normally it will rotate 1 rotation.
Up:
Click this icon, camera will move up, you can click one by one or hold it to control the movement.
Down:
Click this icon, camera will move down, click it step by step or hold on to control the movement
NOTE:
It is the same operation as left, right, up-left, up-right, down-left, down-right etc.
Figure 4.0
Set Preset:
It supports 9 preset positions. First, control the camera to rotate to the special position you
need to set, click
Set Preset
button
it will pop-up a dialog frame (Figure 4.0), choose any number
(1-9).
Call Preset:
It supports 9 preset positions. If you want to monitor an important area quickly and
precisely, just click
Call Preset Position
button
it will pop-up a dialog frame (Figure 4.0), choose the
number, then the camera will rotate to the preset position automatically.
If you want to use
Call Preset
, you have to
Set Preset
first.
NOTE:
if you set different positions with a same number, the camera will record the last position setting only.
Summary of Contents for XX39A
