24
Figure 4.5
Set Preset:
It supports 9 preset positions. First, control the camera to rotate to the special position you
need to set, click
Set Preset
button
it will pop-up a dialog frame (Figure 4.5), choose any number
(1-9).
Call Preset:
It supports 9 preset positions. If you want to monitor an important area quickly and
precisely, just click
Call Preset Position
button
it will pop-up a dialog frame (Figure 4.5), choose the
number, then camera will rotate to the preset position automatically.
If you want to use
Call Preset
, you have to
Set Preset
first.
NOTE:
If you set different positions with a same number, camera will record the last position setting only.
Cruise:
Preset cruise, camera can cruise according to the different presets you set.
Click this icon, the camera will rotate up and down, i.e., vertical tilt, click
to stop it.
Click this icon, the camera will rotate left and right, i.e., horizontal pan, click
to stop it.
Click this icon, IO output Switch ON. Click
to set it OFF.
Figure 4.6
PTZ speed:
set value from 1 to 100, click the icon to go back to the factory settings.
Brightness:
set value from 0 to 255, click the icon to go back to the factory settings.
Contrast:
set value from 0 to 255, click the icon to go back to the factory settings.
Hue:
set value from -128 to 127, click the icon to go back to the factory settings.
Saturation:
set value from 0 to 200, click the icon, it will back to factory settings.
Summary of Contents for XX39A
