27
There are two options for stream,
Main-Stream
and
Sub-Stream
, you can set the stream based on the actual
operation environment, for example, if the bandwidth is good enough, set Main-Stream as Initial-Stream, or
choose Sub-Stream if better.
Set the parameters of
Main-Stream
and
Sub-Stream
as below:
Resolution
: 640 x 480, 320 x 240 optional.
Frame Rate
: Set the frame rate according to the bandwidth. Frame rate could be “
Auto
” or “
from 1 fps to 30
fps (Real time)
”. If the network situation is not ideal, you can reduce the frame rate to control the coding rate,
make the moving pictures smoother.
Bit Rate
: Higher bite rate means better quality images, but takes more bandwidth, so adjust the settings
according to the actual bandwidth available. The range of bit rate from 128 Kbps ~ 4 Mbps.
For IE, camera will show as below:
Figure 5.1
For Safari, Chrome, Firefox, camera will show as below:
Figure 5.2
Image Quality
: Better image quality, higher bit rate value, but it will take more bandwidth, the image quality
parameters could be set as below:
Summary of Contents for XX39A
