65
Fill in the
web
port,
for example port 85, IP address as 192.168.1.100, click Save.
(1) Repeat step 3 above, it will pop-up the window again, fill in the
media port
as 38401, IP address as
192.168.1.100, then save.
(2) Then check the “Device Info” –“DDNS Status”,
It will show DDNS: http://test.aipcam.com:85 , input this link in IE, then you can visit this camera remotely.
BELKIN:
1. Login to the router.
2. Choose “
Firewall
”, select “
Virtual Servers
”
3. Input the port (
don’t use 80
) and IP address, then click save.
NOTE
: The port and IP address should be the same as the camera.
Figure 13.2
DLINK:
1. Login to the router.
2. Choose “
Advanced
”, select
“Virtual Servers”
3. Input the port, IP address, Protocol, then click save.
NOTE
: The “
public port
” & “
private port
” should be the same as camera’s port, choose the
protocol to be “
both
”.
Summary of Contents for XX39A
