AirVelocity 1500 Installation Guide
DUG01560
Airspan Commercial and Internal Use
3
6.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the
power before cleaning.
7.
The units should not be located near power lines or other electrical power circuits.
8.
It is the installer
’s responsibility to install this device in accordance with the local electrical
codes.
9.
Installation of the AirVelocity 1500 must be contracted to a professional installer.
10.
Disconnect Device. The socket outlet should be easily accessible in case you have to
disconnect the device.
11.
When installed in the final configuration, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in which it is installed. If
necessary, consult with the appropriate regulatory agencies and inspection authorities to
ensure compliance.
Warning of Hazardous Voltages
On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power.
Remove metal jewellery that could come into contact with AC power.
On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that
may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits.
Note:
Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations
1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to
ensure that the product is disposed of in conformance with the relevant regulatory requirements
.
