iRelay 460 Equipment Installation Guide
UGD-D01035
Airspan Commercial and Internal Use
5
1 Introduction
iRelay 460 (iR460) is part of
iRelay
—Airspan’s wireless backhaul family.
iR460 offers the following benefits:
•
Provides PtP connectivity.
•
Functions as the building blocks that provides fully secure and encrypted capabilities.
•
Provides a trusted wireless backhaul solution that supports all capacity needs of Airspan’s
eNodeB.
•
Provides high-speed data.
iR460 contains both radio and antenna as a single unit housed such that the antenna direction can be
rotated by software command and by automatic link acquisition software. The complete weatherproof
enclosure can be mounted on a wall, pole, or tower, and powered by an AC or a DC PoE device using
a CAT5e cable.
1.1 iR460 with Internal Steerable Antenna Assembly
This form factor is targeted for short or medium distance deployments where the feeder base is
located on pole mounts (typically, on a lamppost, towers or in a building location).
Figure 1:
iR460
Table 2.
iR460 Panel Antenna Specification
Item
Specification
Frequency range
LTE B41
Antenna
60°
EIRP
31 dBm (max)
Input power (typical)
< 20 Watt @ Input to PoE
Dimensions (H x W x D)
330 x 200 x 200 mm (excluding cable glands and
mounting)
iR460 unit weight
See
Table 7
Radome
UV protected polycarbonate
Operating temperature range
-40°C to +65°C
Wind load
200 km/h (survival)
