TOWINg
B - 6
B
B - 7
HITCHING UP
Hitching up your trailer is something that will become almost second nature
with practice. The following section includes proper hitch load distribution.
Proper training on connecting your trailer to a tow vehicle is essential for safety.
When coupling the trailer to the towing vehicle, always ensure the two vehicles
are properly coupled, including the safety chains and breakaway switch cable,
in accordance with the tow vehicle manufacturer’s instructions, the hitch
manufacturer’s instructions, and this manuals instructions. All coupling devices
and procedures must conform to State and Federal regulations. Please see
your dealer or other qualified personnel for instruction on the proper hitching
of your trailer.
Equalizing Hitch Load Distribution
When a trailer is hitched up properly to a tow vehicle with a load equalizing
hitch, approximately 1/3 of the trailer’s tongue weight will be on the trailer’s
axles and 2/3 will be transferred to the tow vehicle, 1/3 of this weight transfer
will be carried by the front wheels and 1/3 by the rear wheels of the tow vehicle
(See diagram), Thus, the tire load of each wheel on the tow vehicle will be
increased by 1/6 of the trailer’s tongue weight. The tire air pressure of the tow
vehicle should be increased to compensate for this additional weight. Refer to
the vehicle’s owner’s manual for this information.
Percentage of Tongue Load
distributed to car and/or trailer wheels
Summary of Contents for 2013 SPORT
