ELECTRICAL CONNECTION
flush mounting
Surface mounting
Dimensions in mm.
24
32
50
x
5
0
82
82
65
ENERGY BOX
SUPPLY
N
1
3
4
5
N
R
S
T
To switch between the models, the fan speed setting
ENERGY BOX
350 - 3.500
in accordance with the scheme carry out the
electrical connection.
if RGS control panel is used for the models between
ENERGY BOX
350 - 3.500
, make the electrical connection with the connector
in the switch box as shown in figure (L and N terminals).
Unit can be controlled by the control panel with connecting control panel’s
A and B terminals as shown. If these is an electric heater, the connectors
which are tagged as R,S,T must be supplied by three-phase energy.
Setting the fan speed switch is
Mains connection.
ENERGY BOX units connected to
switch the fan speed setting.
! WARNING
Grid connection must be done to the L and N
R,S,T if necessary) terminals. A and B
terminals are room control panel connections.
! WARNING
L
N
Z
Z
T
INTERNAL CONNECTION UNIT / DO NOT CHANGE
Speed Control Switch Electrical Connection Diagram
(Standart ENERGY BOX units Electrical Connection Diagram)
MAIN
CONNECTIONS
MAIN
CONNECTIONS
230 V AC
RGS Control Panel Connector Diagram
10
+30.211.70.55.500 +30.210.22.23.283
