Page 30
07.DaTa RESET (MODEL PROgRaMMing DaTa RESET), cOnTinUED....
Although Model Type selection options are model-specific, the Data Reset function does
NOT
Reset them. This is useful if
you have two similar models, but different programming needs for each. For example, if you have two similar aircraft that
use the same Model Type selection options (e.g., TAIL>2xEL and AILE>2) but different Programming Data (e.g., Servo Reversing,
End Point Adjustments, etc), you can copy the first model's Programming Data, using the Data Copy function, then use the Data
Reset function to Reset all of the Programming Data except Model Type selection options. This saves time by not needing to
re-program Model Type selection options.
Resetting Model Programming Data
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight DATA RESET, then press
the ENTER key to display the DATA RESET menu. The cursor will
default to the currently selected model, for example >01:SANWA-01
<AERO> and ENTER will flash in the Programming Window.
3) Press the INC+/M1 or DEC-/M2 keys to select the model you would like
to Reset the Programming Data for. ENTER will continue to flash in the
Programming Window.
4) Press the ENTER key. DATA RESET OK? will be displayed and INC+
will flash.
5) Press the INC+/M1 key to Reset the Programming Data for the selected
model. After ~10 seconds, the Programming Data will be Reset as
indicated by the progress bar, and COMPLETE!! will be displayed in
the Programming Window. Press any key to return to the DATA RESET
menu.
If you want to go back and change the model or you don't want to Reset the Programming Data for any reason, press
the DEC-/M2 or END/M3 keys.
aERO MODEL TyPE
08.REvERSE (SERvO REvERSing)
The Servo Reversing function electronically switches the direction of servo travel. For example, if you pull the elevator control
stick back for Up elevator, but the elevator moves Down, you can use the Servo Reversing function to switch the direction of
servo travel to make the elevator move Up.
Changing Servo Reversing Adjustment Values
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight REVERSE, then press the
ENTER key to display the REVERSE menu. The cursor will default
to 1EL>NOR.
The channel numbers will differ based on the Model Type selection options you chose previously in the TYPE menu.
For example, if you chose AILE>2, channel 2 will be displayed as LA (Left Aileron) and channel 5 will be displayed as
RA (Right Aileron).
Summary of Contents for SD-6G
Page 1: ...Page 1...
