25
Airwallet PRO300
Installation Guide
• Your Airwallet PRO is a high-voltage product. Do not open it for
any reason, while it is connected to the power source. If your
Airwallet PRO needs service, see “Learning More, Service, and
Support” on page 23.
• If you have to use the 24V DC system on your Airwallet PRO,
double-check your terminals on the Airwallet PRO, before
connecting it to your power source.
• Avoid wet locations
»
WARNING
:
To reduce the chance of shock or injury, do not
use your Airwallet PRO in or near water or wet locations.
»
Protect Airwallet PRO from rain, water, or other moisture. If
you do disconnect it from the power source, before cleaning
and drying the product. In this case, you may need to send
your product to Airwallet for service. See “Learning More,
Service, and Support” on page 23.
Do Not Make Repair Yourself
•
WARNING
:
Do not attempt to repair the Airwallet PRO. You will
run the risk of electric shock.
• The Airwallet PRO may only be disassembled to enable the 24V
DC wires.
Installation Safety
• A readily accessible disconnect device shall be incorporated
external to the product because the Airwallet PRO cannot
disconnect the product from the power supply network without
it.
• The product should be protected against short circuit with
and external protection on building installation. The Airwallet
